Hinges: Take Apart  #30R & #31

Atco take apart hinges, also known as pin hinges, are used in applications where, for example, the top of a case must be removeable, yet securely hinged.

(Click on pictures for a larger view)

The #30R Hinge is approx. 1.0" x 1.2" wide and has four .135" dia. mounting holes for rivets or screws. Hole centers are .850" left to right and .625" top to bottom. This hinge is also available on special order in a left hand version.(Hole configuration on left hand vesion is not the same as shown for the 30R above.)

The #31 Hinge is approx. 1.5" high and 1.8" wide and has four .136" holes for rivets or screws. Hole centers are 1.370" left to right and .750 top to bottom.(1.0" top to bottom also available) The #31 will fit over a 7/8" valance.

The #31F Hinge(not shown)is approx. 1.5" high and 1.840" wide and has four .136" holes for rivets or screws. Hole centers are 1.390" left to right and .750 top to bottom.(1.0" top to bottom also available) This hinge is similar to the #31, but is flat and does not have valance relief. It is available on special order only.

Other take apart hinges available-- please consult factory.


It's easy to contact us for a quotation, or any other information.
  • Click on "Request Info" at the top of each product page.
  • Phone us at 973-379-3171
  • Fax us at 973-379-4932
Atco Products - Quality Hardware Since 1938
  • To return to our Home Page click on the Yellow " Atco Products " Box at the top of the page.