Push Catches 924 & 1731

Surface or inset mount push catches with narrow profiles for use in narrow lid, or limited space applications.(Click on picture for a larger view)

The 924H is generally used as a surface mounted latch on all types of wooden, plastic, and metal box applications. However, it can also be inset internally in a mitered slot in 1/8" thick boxes. Overall height is approx. 1" and overall width is approx. 1-7/8". The top is 7/16" high and will easily fit on a 1/2" high box lid. The bottom is approx. 9/16" high. It has two .136" dia. holes on top (.925" center to center) and bottom (1.585" center to center) for mounting with 1/8" rivets or #4 screws. The centerlines of the mounting holes are approximately .650" from top to bottom. Push knob to the left to open. Standard finishes are nickel or brass plate.(Same as Ludwig 4070.)

The 1731 Push Catch is made for inset mounting on all types of boxes. Overall height is approx. 3/4" and overall width is approx. 1-7/8". The top is 5/16" high. It has two .086" dia. holes on 1-5/8" centers on both top and bottom for mounting with #2 screws or #16 escutcheon pins. The centerlines of the mounting holes are approximately .375" from top to bottom. With a depth of about .200" this will fit into a 1/4" thick piece of wood. Push knob to the right to open (Push knob to the left to open on special order). Standard finish is rack brass plate.

Project Pack: The 1731 is sold in bulk or in a minimum package containing 10 push latches with #2x1/4 phillips head mounting screws sent by United Parcel at $ 40.00 complete.

Call Atco for recommendations for Screws for your next project.




It's easy to contact us for a quotation, or any other information.
  • Click on "Request Info" at the top of each product page.
  • Phone us at 973-379-3171
  • Fax us at 973-379-4932
Atco Products - Quality Hardware Since 1938
  • To return to our Home Page click on the Yellow " Atco Products " Box at the top of the page.