  These flat Hangers are ideal for pictures, mirrors and other wall hangings. The turn buttons allow quick replacement of a framed object or positive closure.
(Click on picture for a larger view)
The 1805 Hanger is 1-1/32" in overall length with one .145" hole for mounting with a #6 screw. The large hole is approx. 5/16" and can be used for direct mounting or wiring. The base is slightly more then 3/8" wide with the circular area about 1/2" diameter. Minimum pack 5000 pcs.
The 1812 Hanger is 1-5/8" in overall length with two .145" holes on 1/2" centers for mounting with #6 screws. The large hole is slightly over 5/16" in diameter and can be used for direct mounting or wiring. The base is slightly more then 3/8" wide with the circular area about 1/2" diameter. Minimum pack 5000 pcs.
The 1813 Hanger is 2-1/16" in overall length with two .145" holes on 1/2" centers for mounting with #6 screws. The large hole is slightly over 5/16" in diameter and can be used for direct mounting or wiring. The base is 5/8" wide. Minimum pack 1000 pcs.
The 5462 Small Turn Button is 13/16" in overall length with one .145" hole for mounting with a #6 screw. The width is approximately 5/16" Minimum pack 5000 pcs.
The 5472 Large Turn Button is 1" in overall length with one .152" hole for mounting with a #6 screw. The width is approximately 7/16" Minimum pack 5000 pcs.
Standard finish on all three items is Zinc plate. Other finishes available on special order.
We stock #6 Phillips Pan Head screws in either 3/8" or 1/2" length for these items. Minimum pack is 5,000 pcs.
|