Click to enlarge

<b>Wire EDM Services</b>

When you need to speed production, Atco Wire EDM Service is the solution. Wire EDM (electric discharge machining) allows us to produce any complex shape you need, in almost any conductive material, and in any quantity.

Your parts will be made to high accuracy under computer numerical control in only a fraction of the tooling time normally required.

Benefits of Wire EDM include:

Close Tolerances and Great Quality: The most complex contours imaginable can be cut with tolerances as close as +/- .0002 inch. With no form grinding necessary, die blocks no longer have to be split. This means huge savings in time and money. Finally, since Wire EDM is usually done after heat treating, this source of distortion is all but eliminated also.

Exotic Alloys: Hard-to-machine materials are ideal candidates for Wire EDM. Almost any material that conducts electricity can be machined, hardness is of no consequence. Aluminum to Zirconium (and everything in between).

Prototypes: Prototypes can go from drawing board to metal within hours. No hard tooling is usually required. Any changes are done in minutes on a computer, and new parts are on their way. By stacking materials, as many parts as desired are quickly "cut.".

Production: Wire EDM can be an economical way to make 100's or 1000's of parts, especially if tolerances are tight or the material is difficult to machine. Sometimes it is the only way! We would be happy to quote on your parts and we will even tell you if Wire EDM is the best way to make them.

Tool Room Temps: Please consider us your tool room temps. While the costs of Wire EDM services are not insignificant, Wire EDM can often cut days or weeks off the delivery time of new or replacement tools. If you are up against impossible deadlines or in need of short-term help, we would be happy to quote on whatever tool and die work you wish to outsource--Wire EDM services only, or complete tools.

Atco Wire EDM Services can make die inserts, blanking punches, gears, keyways, screw machine form tools, extrusion dies, form punches, prototype components, and much much more. Our three machines will speed your job along.

Let Atco show you how to save substantial $$$. For a no cost evaluation of your next potential Wire EDM job, fax, mail, or e-mail us your drawings or sketches.


Die Sections
Die Sections

Cams
Cams

Electrodes
Electrodes

CMM Inspection
CMM Inspection

Internal Splines
Internal Splines

Stacked Parts
Stacked Parts

WEDM  Laminations
WEDM Laminations


It's easy to contact us for a quotation, or any other information.
  • Click on "Request Info" at the top of each product page.
  • Phone us at 973-379-3171
  • Fax us at 973-379-4932
Atco Products - Quality Hardware Since 1938
  • To return to our Home Page click on the Yellow " Atco Products " Box at the top of the page.